Biddle CA2 Manual page 40

O
PERATION
Switching the heating ON and OFF
Filter
Cleaning the screen
Timer
40
The heating of the air curtain can be switched ON and OFF
manually. This can be useful in summertime when no heating is
necessary.
Switching the heating OFF disables the room temperature
control.
This function can be deactivated via setting 89 in the
configuration menu.
Heating
• Select to switch the heating ON and OFF. When
the heating is switched off, the air stream is displayed in
blue.
The heating can also be switched off by an external signal at
menu
the input of the unit, see
input Heating OFF
, setting .
Dirty filters reduce the effectiveness of the air curtain. It is
therefore necessary to clean or replace the filters at regular
intervals. The service life of the filter is calculated in relation
to the use of the air curtain. You can adjust this by setting the
maximum service life of the filter.
When the maximum service life is reached, a message appears
Home screen
on the .
You may clean the filter with, for instance, a vacuum cleaner,
Maintenance
see section . After some cleanings, however, the
filter must be replaced. New filters are available from Biddle.
When using long-life filters:
The service life of the filter must be set to the maximum
value.
The use of the touchscreen can leave marks or fingerprints on
the screen. The screen can be cleaned using a damp, soft cloth.
The b-touch control panel has a week timer. You can set two
start and stop times for every day of the week. The unit is on
between the start time and the stop time. The second start
and stop times are optional.
ON/OFF
When the button
can also be switched ON or OFF manually. From the next
switching moment the unit then follows the timer again.
C A
OMFORT IR
Configuration 60. Function of
> >
is displayed on the screen, the unit
C
URTAIN