Biddle CA2 Manual page 33

M
ANUAL
1
2
2
Version: 6.1 (05-12-2011)
w
Warning:
If you do not fix the inlet case to the ceiling, the
unit may tip over and fall out of the suspension
brackets.
Installing the inlet plenum
3. Take the inlet grille out of its frame:
- Push the two pins 1 in the grille towards one another
and tilt the grille outward.
1
- Push the two pins at 2 towards one another and take
the grille out.
4. Screw the frame onto the inlet case.
5. Put the grille back into its frame.
Finishing
6. Fix the edge finishing strips around the unit.
I
NSTALLATION
33