Resetting The Pin Code; Configuration Of The Biddle Control Cable - Biddle CA2 Manual

S
ERVICE
6.10

Resetting the PIN code

6.11

Configuration of the Biddle control cable

1 2
66
ê
3 4 5 6
4. Press down microswitch 1.
The LED next to the microswitch no longer flashes.
The unit code is now set.
5. Reset the control panel (see section 5.3.3).
The PIN code of the control panel can be reset using a USB
flash drive:
1. Connect a USB flash drive to the control panel.
The USB menu is activated
2. Press x for 10 seconds.
The PIN code is reset and a new PIN code has to be
entered.
3. Quit the USB menu by removing the USB flash drive.
The control cable for Biddle units is different from standard
modular telephone cables.
The connectors are Type RJ-11, but the connections are
straight. The core is connected to the same pin at both ends
of the cable.
Table 6-1 Colour codes of Biddle cables
P C
IN OLOUR
1 (not used)
2 black
3 red
4 green
5 yellow
6 (not used)
C A C
OMFORT IR URTAIN