Electronics Module - Biddle CA2 Manual

M
ANUAL
3
1
1
6.3

Electronics module

Version: 6.1 (05-12-2011)
2. Loosen screws 3 and remove the frame.
3
For all models
3. Remove the inspection panel:
-
-
1
1
c
Caution:
The whole panel will come loose when you pull it forward:
Take care it does not fall down.
w
Warning:
When replacing the inspection panel, always attach
it using flanged bolts with milled edges: These are
needed for the earth connection.
6.3.1 Introduction
The unit contains one electronics module. It includes:
-
-
-
-
Remove the screws 1.
Pull the panel a little forward and take it away.
the transformer;
the printed circuit board;
the connector plate;
the fuses.
S
ERVICE
61