Appendix A: Power Consumption - Nexcom NISE 105/105A User Manual

Appendix A: Power Consumption

Appendix A: Power Consumption
Power Consumption Management
Purpose
The purpose of the power consumption test is to verify the power dissipation
of system, and the loading of power supply.
Test Equipment
PROVA CM-07 AC/DC CLAMP METER
Device Under Test
DUT: NISE105
CPU: Intel Atom™ processor E3826 dual core, 1.46GHz
®
Memory: Transcend 4GB DDR3 SODIMM (TS512MSK64W6H)
HDD: SATA2 HDD 2.5 40GB 5400RPM (ST940817SM)
CFast: Transcend CFast 32GB (TS32GCFX500I)
Power Supply: LABORATORY DC POWER SUPPLY GWINSTEK GPC-60300
Add-on Card: MINI PCIE CARD 8790V
CPU Cooler: NISE105CPU HEATSINK SHYUNG SHUHN
System FAN: N/A
Keyboard: Microsoft Wired Keyboard 600
Mouse: Microsoft Basic Optical Mouse
Test Procedure
1. Power up the DUT, boot into Windows 8 x32 Pro
2. Entering standby mode (HDD power down)
3. Measure the power consumption and record it.
4. Run Burn-in test program to apply 100% full loading
5. Measure the power consumption and record it.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Test Data
Full-Loading Mode
Total
Standby S3Mode
Total
62
Sys #1 Sys #1
+12V +24V
2.03A 1.11A
24.36W 26.64W
0.93A 0.49A
11.16W 11.76W
NISE 105/105A User Manual