Connecting Cameras; Communications; Figure 1-1 Standard Connections: Telephone Line (Telco) Or Network (Lan) - Honeywell Rapid Eye Installation Manual

Introduction

Connecting Cameras

Communications

Connect a telephone line to the
TELCO port and/or connect an
RJ45 (ethernet) cable to the
LAN port on the DVR
20
Availability of LocalView on V8.1 DVRs Offering Video Analytics
On Rapid Eye V8.1 units offering Video Analytics, LocalView can only be used to change
the unit's network settings (as in
page 33). Use the Admin and View applications to monitor video and make all other
configuration changes (refer to the
Administrator Guide and Rapid Eye™ Multi-Media Digital Video Recorder Remote View
Operator Guide for more information).
Connect a coaxial cable of each camera (maximum 16) to the Multi-Media DVR. Connect
the first camera to Video Input In 1, the second to Video Input 2, and so on. For more
information, see Connecting a
Connect the Multi-Media DVR to a network, to a telephone line, or both. See
Figure 1-1 Standard Connections: Telephone Line (TELCO) or Network (LAN)
For more information, see
Using LocalView to Modify the IP Address of the DVR
Rapid Eye™ Multi-Media Digital Video Recorder System
Camera, page 26, and
VIDEO connector on
camera to VIDEO
INPUT on DVR
Testing a Dial-Up Connection in the Field
Cabling on page 67.
Figure
on page 38.
on
1-1.