Honeywell Rapid Eye Installation Manual page 66

Frequently Asked Questions
Problem Possible Solution
No video
Check the camera connections.
Check if there has been a power outage. Has the UPS
failed?
Check that the DVR, cameras, and other hardware are
powered.
Check if the site connection information—in the database
that you are using to log on—reflects the type of
connection used by the PC and the Multi-Media DVR. Are
you using a network or dial-up connection?
66
Table A-1 Installation FAQs (cont'd)
Refer to ...
Connecting a Camera on page
Powering Up on page 29
Powering the Multi-Media DVR
page 28
Recording the Installation Details
page 25, or the Rapid Eye™
Multi-Media Digital Video Recorder
System Administrator Guide.
26
on
on