Managing Department IDs
You can manage Department IDs with the Remote UI.
Follow the procedure below to specify Department ID Management settings from
the Remote UI.
IMPORTANT
Department ID Management is automatically set if the optional Card Reader-C1 or Card
Reader-D1 is attached to the machine.
NOTE
•
The Department ID Management settings available using the Remote UI are the same as
those that you can access from the control panel of the machine by pressing
(Additional Functions) © [System Settings] © [Dept. ID Management]. For instructions
on using the control panel to specify Department ID Management settings and more
information on Department ID Management, see Chapter 4, "System Manager Settings,"
in the Reference Guide, or Chapter 6, "Setting and Adjusting Common Settings to Suit
Your Needs," in the User's Guide (iR6000/5000).
•
For a detailed explanation of Department ID management, see Chapter 4, "System
Manager Settings," in the Reference Guide, or Chapter 6, "Setting and Adjusting
Common Settings to Suit Your Needs," in the User's Guide (iR6000/5000).
•
If the optional Card Reader-C1 or Card Reader-D1 is attached, the screens that appear
are different from those shown in the procedure below.
Managing Department IDs
2
2-101