Table of Contents
Advertisement
2. Remove the protective cap from the SFP module, as shown in Figure 12 . Save
Figure 12. Small Form-Factor Pluggable (SFP) Module
3. Remove the protective cap from the mini-hub port. Save the protective cap for
4. Insert the SFP module into the mini-hub port until it clicks into place.
Figure 13. Installing an SFP module in a mini hub
5. Connect an LC-LC Fibre Channel cable. For information about the LC-LC cable,
Removing SFP modules
To remove the SFP module from the mini hub, do the following:
Attention:
the LC-LC Fibre Channel cable before you remove the SFP module.
the protective cap for future use.
Plastic tab
Protective cap
future use.
SFP module
Fiber-optic
cable
see "Using LC-LC Fibre Channel cables" on page 18.
To avoid damage to the cable or SFP module, make sure you unplug
SFP module
2 G
b /s
1 G
b /s
!
2 G
b /s
1 G
b /s
O U
!
T
2 G
b /s
1 G
O U
b /s
T
!
2 G
b /s
1 G
b /s
O U
T
!
I N
O U
T
I N
I N
I N
Chapter 2. Connecting the FAStT700 Storage Server
17
Advertisement
Table of Contents
