Table of Contents
Advertisement
Figure 1. IBM FAStT700 Fibre Channel Storage Server
Inventory checklist
The IBM FAStT700 Fibre Channel Storage Server comes with the following
hardware:
v Two power cords
v One rack-mounting hardware kit:
The IBM FAStT700 Fibre Channel Storage Server comes with the following
software and documentation:
v IBM FAStT Storage Manager version 8.0 CD including:
v Rack mounting assembly kit including:
v IBM FAStT700 Fibre Channel Cabling Instructions
To connect the FAStT700 Storage Server to other devices, you might need the
following hardware options, which are purchased separately:
v IBM Small Form-Factor Pluggable (SFP) Module
v IBM LC-LC Fibre Channel Cable
v IBM LC-SC Fibre Channel Cable Adapter
v IBM FAStT700 Mini Hub
FAStT700 Storage Server components
The FAStT700 Storage Server has the following removable components, called
customer replaceable units (CRUs). All CRUs are accessible from the front or back
of the FAStT700 Storage Server.
v Bezel (front cover)
v RAID controller (comes with two)
v Battery
v Storage server fan
v Power supply (comes with two)
v Host mini hub (comes with two, four maximum)
v Drive mini hub (comes with two, four maximum)
v Fan and communications module
®
2
™
IBM
TotalStorage
FAStT700 Fibre Channel Storage Server: Installation Guide
– Two rails (right and left)
– Eight black M6 hex-head screws
– Eight clip nuts
– Eight cage nuts
– IBM FAStT Storage Manager version 8.0
– Publications in Adobe Acrobat Portable Document Format (PDF)
For a list of available IBM FAStT700 publications, see "Related publications"
on page xiv.
– Rack Mounting Instructions
– Rack Mounting Template
– White tape dots
Advertisement
Table of Contents
