Table of Contents
Advertisement
For more information about connecting to these devices, see the documentation
that comes with the device.
Figure 15 shows an LC-LC Fibre Channel cable.
Figure 15. LC-LC Fibre Channel cable
The following sections provide the procedures for properly connecting and removing
an LC-LC Fibre Channel cable.
Note: If you are connecting a FAStT700 Storage Server to a FAStT EXP500
Connecting an LC-LC cable to an SFP module
To connect an LC-LC Fibre Channel cable to an SFP module, complete the
following steps.
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could
v Use of controls or adjustments or performance of procedures other than
expansion unit or to an IBM FAStT host adapter, you must also use an
LC-SC Fibre Channel cable adapter. For more information about using the
Fibre Channel cable adapter, see "Using LC-SC Fibre Channel cable
adapters" on page 22.
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
those specified herein might result in hazardous radiation exposure.
Chapter 2. Connecting the FAStT700 Storage Server
19
Advertisement
Table of Contents
