Table of Contents
Advertisement
v The SFP module housing has an integral guide key designed to prevent you from
v Use minimal pressure when inserting the SFP module into a mini-hub port.
v You can insert or remove the SFP module while the port is powered on.
v The operational loop performance is not affected when you install or remove an
v You must insert the SFP module into a mini-hub port before you connect the
v You must remove the fiber-optic cable from the SFP module before you remove
To install an SFP module, complete the following steps.
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could
v Use of controls or adjustments or performance of procedures other than
DANGER
Attention:
damage from static electricity. For details about handling static-sensitive devices,
see "Handling static-sensitive devices" on page 6.
1. Remove the SFP module from its static-protective package.
®
16
™
IBM
TotalStorage
FAStT700 Fibre Channel Storage Server: Installation Guide
inserting the SFP module improperly.
Forcing the SFP module into a port could cause damage to the SFP module or
the port.
SFP module.
fiber-optic cable.
the SFP module from the mini hub. Refer to "Removing SFP modules" on
page 17 for more information.
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
those specified herein might result in hazardous radiation exposure.
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
When you handle static-sensitive devices, take precautions to avoid
Advertisement
Table of Contents
