Table of Contents
Advertisement
The following illustrations show examples of QSFP to QSFP and QSFP breakout cables.
|
| |
|
|
1. QSFP quad connector
|
|
Figure 28. QSFP to QSFP standard cables
|
|
|
Figure 29. QSFP to SFP breakout/cables
|
1. QSFP MPO connector
|
2. SFP connectors
|
DANGER
|
|
Use only optical transceivers that are qualified by IBM and comply with the FDA Class 1 radiation
performance requirements defined in 21 CFR Supchapter I, and with IEC 60825 and EN60825.
|
Optical products that do not comply with these standards might emit light that is hazardous to the
|
|
eyes.
|
|
For Class 1M transceiver specifications, refer to Appendix B, "Product Specifications," on page 231.
For current information on qualified transceivers supported by this device, refer to the Fibre Channel
|
Transceiver Platform Support Matrix and Transceiver Module Resources at www.brocade.com. These resources
|
include transceiver data sheets.
|
Port and extension blade transceivers
|
FC SFP+ transceivers installed in port blades and extension blade ports provide connections to devices on
|
FC fabrics. The FC ports on Extension blades support Fibre Channel Routing Services (FCRS) The
|
following figure illustrates a FC SFP+ transceiver. A separate fiber optic cable plugs into the transceiver.
|
|
Installing Transceivers and Cables
67
Advertisement
Table of Contents
