Table of Contents
Advertisement
Preparing for installation
Use the following procedure to prepare the FAStT700 Storage Server for installation
into a rack cabinet.
1. Prepare the site to meet all area, environmental, power, and site requirements.
2. Move the FAStT700 Storage Server and its rack cabinet to the site.
3. Remove the FAStT700 Storage Server from its shipping container and check
4. Assemble the tools and equipment you will need for installation. These might
Handling static-sensitive devices
Attention:
avoid damage, keep static-sensitive devices in their static-protective package until
you are ready to install them.
To reduce the possibility of electrostatic discharge, observe the following
precautions:
v Limit your movement. Movement can cause static electricity to build up around
v Handle the device carefully, holding it by its edges or its frame.
v Do not touch solder joints, pins, or exposed printed circuitry.
v Do not leave the device where others can handle and possibly damage the
®
6
™
IBM
TotalStorage
FAStT700 Fibre Channel Storage Server: Installation Guide
For more information, see "Operating specifications" on page 5.
Statement 4:
≥ 18 kg (39.7 lb)
CAUTION:
Use safe practices when lifting.
the contents (see "Inventory checklist" on page 2). If any items are missing,
contact your IBM reseller before proceeding.
include:
v Power cords (comes with the FAStT700 Storage Server)
v Number two Phillips and medium flat-blade screwdrivers
v Antistatic protection (such as a grounding wrist strap)
v Fibre Channel (FC) and Ethernet interface cables and cable straps
v Rack-mounting hardware (comes with the FAStT700 Storage Server)
v IBM FAStT Storage Manager software to configure the storage subsystems
(comes with the FAStT700 Storage Server)
Static electricity can damage electronic devices and your system. To
you.
device.
≥ 32 kg (70.5 lb)
≥ 55 kg (121.2 lb)
Advertisement
Table of Contents
