Table of Contents
Advertisement
DANGER
1. Read the information in "Handling fiber-optic cables" on page 18.
2. If necessary, remove the protective cap from the SFP module, as shown in
3. Remove the two protective caps from one end of the LC-LC cable, as shown in
Figure 16. Removing fiber-optic cable protective caps
4. Carefully insert that same end of the LC-LC cable into an SFP module that is
Figure 17. Inserting an LC-LC Fibre Channel cable into an SFP module
®
20
™
IBM
TotalStorage
FAStT700 Fibre Channel Storage Server: Installation Guide
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
Figure 12 on page 17. Save the protective cap for future use.
Figure 16. Save the protective caps for future use.
Fiber-optic
cable
installed in a FAStT700 Storage Server mini hub. The cable connector is keyed
to ensure it is inserted into the SFP module correctly. Holding the connector,
push in the cable until it clicks into place.
Protective cap
Advertisement
Table of Contents
