11. Hold pebble 'H' upright with the
arrow pointing to the top. Place
pebble 'H' between the front and rear
base pebbles. It should rest in
between pebbles 'C' & 'D' and
against the moulded pebble in the rear
pebble base. (See figure 42).
12. Hold pebble 'I' upright with the
arrow pointing to the top. Place
pebble 'I' between the front and
rear base pebbles. It should rest
against the side of the firebox (See
figure 43).
13. Hold pebble 'J' upright with the
arrow pointing to the top. Place
pebble 'J' on top of the base pebble
rear. (See figure 44)
14. Hold pebble 'K' upright with the
arrow pointing to the top. Place
pebble 'K' on top of the base pebble
rear. (See figure 45)
INSTALLER GUIDE
Figure 42.
Figure 43.
Figure 44.
Figure 45.
Page 31