Summary of Contents for Valor Black Beauty Unigas II 473
Page 1
M O D E L 4 7 3 R o o m S e a l e d R a d i a n t / C o n v e c t o r G a s F i r e Black Beauty Unigas II This Owner Guide is intended to help you care for your Valor gas fire.
This appliance is for use with natural gas (G20) This appliance is for use in the United Kingdom (GB) and the Republic of Ireland (IE) only. Thank you for choosing Valor. All Valor gas fires are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years’...
Soft wall coverings (e.g. embossed vinyls etc.) are easily affected by heat. They may, therefore, scorch or become discoloured when close to a heating appliance. Please bear this is mind when having a heating appliance installed and when redecorating. As with any gas fire, this appliance must be installed by a competent person in accordance with the latest edition of the Gas Safety (Installation &...
Thank you for choosing this Valor gas fire. It has been designed to give years of trouble-free service. To maintain its optimum performance, advantage should be taken of the regular servicing and inspection facilities available for gas appliances. Annual servicing is recommended. These instructions are provided to help you in operating and looking after your new fire and should be kept in a safe place together with the installation and servicing instructions for future reference.
Turn the control knob gradually to your desired setting. Both burners should gradually increase in output until at MAX position the main burner is at its greatest heat output and the decorative flames are at their full magnitude. To turn off 2.5.1 To turn the main and decorative flames off but leaving the pilot alight, depress the control knob partially, turn clockwise to IGN and release the knob.
Page 6
Fig. 6 Front Right Coal “ B” Location Fig. 7 Front Left Coal “ C” Location 3.3.2 Place the front right coal (embossed 'B' underneath) in position. The flat bottom front face of the coal should rest on the metal ledge immediately behind the bottom front of the firebox opening.
Page 7
3.3.5 Place the rear right coal (embossed 'D' underneath) in position as shown in figure 8. 3.3.6 Place the rear left coal (embossed 'E' underneath) shown in figure 9. 3.3.7 Replace the window unit ensuring that the seal around the frame is not damaged or misplaced.
SERVICING & MAINTENANCE In order to achieve and maintain high levels of personal safety and performance efficiency it is essential that the flue terminal outside the building is kept clear of any form of obstruction. We recommend that all gas appliances and their flues, are checked annually by a competent person (in the UK a CORGI registered installer).
Page 9
Valor fires are CE Approved and designed to meet the appropriate British Standards and Safety Marks. All Valor fires are manufactured to the highest standards of quality and excellence and are manufactured under a BS EN ISO 9001 quality system accepted by the British Standards Institute. Valor is a member of the Society of British Gas Industries which works to ensure high standards of safety, Valor is a Corgi registered company.
Need help?
Do you have a question about the Black Beauty Unigas II 473 and is the answer not in the manual?
Questions and answers