Valor Quantum & Urban 746 Installer's Manual page 29

INSTALLER GUIDE
3. Install the 11 loose
pebbles as follows. The
underside of each
pebble is marked with a
letter 'A' to 'K' and an
arrow.
The pebbles should be
positioned so that the
arrows always point
towards the back of the
fireplace opening. When
located into position the
stem of each arrow
should be at 90° to the
rear of the fireplace
opening (See figure 35).
4. Hold pebble 'A'
upright with the arrow
Figure 35.
pointing to the top.
Place pebble "A" on top
of the front base pebble. The
pebble should rest against the
moulded pebble to its left. (See
figure 35).
5. Hold pebble 'B' upright with the
arrow pointing to the top. Place
Figure 36.
pebble "B" on top of the front
base pebble. (See figure 36).
6. Hold pebble 'C' upright with the
arrow pointing to the top. Place
pebble "C" on top of the front base
pebble. It should lie against the
moulded pebble to its left. (See figure
Figure 37.
37).
Page 29