Factory Settings; Clock Settings; Gpi Settings - Datavideo HS-2800 Quick Start Manual

FACTORY SETTINGS

-
Press the ENTER button and then press DOWN button select item 24 for FACTORY SETTINGS.
-
Press the RIGHT and then press UP button select your setting.
-
Press the ENTER button to confirm your setting.

CLOCK SETTINGS

-
Press the ENTER button and then press DOWN button select item 25 for CLOCK SETTINGS.
-
Press the RIGHT button to select X-POSITON / Y-POSITON / SET HOURS / SET MINUTES / CLEAR
SECONDS.
-
Press the RIGHT and then press UP or DOWN button select your setting.
-
Press the ENTER button to confirm your setting.
MULTISCREEN MODE
-
Press the ENTER button and then press DOWN button select item 26 for MULTISCREEN MODE.
-
Press the RIGHT button to select
-
A: W1=9 IN; W2=3 IN+PVW+PGM / B: W1=12 IN+PGM+PVW; W2=PGM /
-
C: W1=8 IN+PGM+PVW; W2=PGM / D: W1=12 IN+PGM+PVW;W2=W1 /
-
E: W1=8 IN+PGM+PVW; W2=W1.
-
Press the RIGHT and then press UP button select your setting.
-
Press the ENTER button to confirm your setting.

GPI SETTINGS

-
Press the ENTER button and then press DOWN button select item 27 for GPI SETTINGS.
-
Press the RIGHT button and then press UP or DOWN button to select INPUT SELECT / TIME DELAY.
-
Press the RIGHT and then press UP or DOWN button select your setting.
-
Press the ENTER button to confirm your setting.
COUNT DOWN TIMER SETTINGS
-
Press the ENTER button and then press DOWN button select item 28 for COUNT DOWN TIMER SETTINGS.
-
Press the RIGHT button and then press UP or DOWN button to select INPUT1~ INPUT12.
-
Press the RIGHT and then press UP or DOWN button select COUNT DOWN ON / DOWN COUNTER VALUE.
-
Press the RIGHT button and then press UP or DOWN button to select your setting.
-
Press the ENTER button to confirm your setting.
23