Datavideo HS-2800 Quick Start Manual page 8

7. PROGR & PRESET
Picture In Picture can be set up in one of four preset positions, or manually
moved to any position on the screen.
It is possible to overlay titles from external signal in 2 ways, i.e. via Luma Keying
or via Video + a-channel. The input signals used for the titles must be the same
format as the basic output mode (HD or SD). It is prohibited to apply SD titles
signal when the HD is the basic format.
It is necessary to meet the following condition to realize 2 DSK channels:
DSK1 Preview DSK1 Program (titles)
DSK2 Preview DSK2 Program(titles)
8. SPEED
Selectable of three different speeds for transition effect.
9. CUT
Change the main/sub source immediately.
FTB
Fade to Black is performed upon FTB button stroke only in the Program Channel.
The Button is lights with red color in this case.
The previously pressed button of a signal source for Program Line stays with light
on.
There is FTB indication multi screen nearby the Program window.
A repeated button stroke will escape the mode.
When the mode is active, there is Black Field in the Program, but signal switching
is still functional, i.e. it is possible to replace the signal at the Program output, and
there will be a selected source when the FTB is deactivated.
AUTO TAKE
Take the effect by auto speed.
10. T-Bar
The T-Bar is used to carry out a manual transition such as a wipe, fade, mix or
key. When it has travelled as far as it can go the transition is complete.
For more information, see Calibrating the T-bar.
If you don't finish calibrating step, the T-Bar may cause incorrect results.
11. TIME & CLOCK
Select HS-2800 TIMER or CLOCK Functions on the screen.
12. PROGRAM
Used to select which of the 12 video input channels or background or color bar is
sent to the PROGRAM video output.
7