Table of Contents
Advertisement
1. HD- SDI IN / HDMI IN
The system consists of 3 input modules. Each module has 4 BNC
connectors and 1 HDMI connector.
There are 12 inputs altogether; part of them can be reconfigured. The
maximum number of inputs for a certain input format: 12 HD SDI,12
SD SDI, 3 HDMI.
Considering the above, it is possible to obtain the following
combinations, for example 10 HD SDI + 2 HDMI, or 9HD SDI+ 3 HDMI.
Besides, we reserve a possibility to switch signal from non-volatile
memory instead of 1 input in each input module, i.e. every input has an
alternative to the HD SDI signal.
In 3 is for flash static pictures, and in 4 is to HDMI; All the video/audio
input signals will be synchronized.
The HS-2800 has 2 modes HD- SDI IN (8CH or 12CH), if you want
upgrade 8CH to 12CH please update the HS-2800 firmware.
2. HD SD- SDI OUT / HDMI OUT / REMOTE CONTROL
There are
One BNC : REF IN
Two BNC output connectors: SDI Outputs
One BNC : REF LOOP
1 HDMI: Multi screen
RJ45: Remote Controls & Firmware Upgrade.
It is possible to assign one of following signals to OUT1, OUT2, OUT 3:
1. Program output
2. Preview output
3. Program output without logo
4. Program output without logo and DSK subtitles
5. Aux output of a selected video input channel
It is possible to assign OUT2, 3 to Signal from HD to SD downscaler.
It can be available at one output (Output2, 3) only and this is for
Program out only.
3. TALLY OUT
The HS-2800 has Tally Output port, This port provide bi-colour tally
information to a number of other Datavideo products, such as the ITC-
100 8 Channel Talkback, TLM-404 LCD Monitor.
4. GPI
The GPI socket can be used for simple external control.
5. RS-422
Feature Coming Soon
10
Hide quick links:
Advertisement
Table of Contents
