Datavideo HS-2800 Quick Start Manual page 7

1. Headphone Volume Control
Controls Headphone or Headset volume level.
Use the Headphone section to accurately monitor any of the sources (LCD or
INTERCOM).
2. FS & AUX
FS
Load frame by PC remote control tool (SEConfig) to RESET(Ch1~12), and then
push FS key to take.
FS button is designed to perform Frame Still=Frame Store feature. A picture that
can be used as background in a live video.
To set the FS, first press and hold the FS button then the CH buttons, 1~12
(preset box) will turn RED pick the desire CH which user wants to have a
background picture on.
AUX
There are three SDI outputs at the rear of HS-2800 and one of them can be
assigned by the user to be AUX-out in order to have a clean source (the video
input signal which only bypassing the HS-2800 to the recorder, without any
further effects on HS-2800, for effects on a, say a PC.)
The AUX feature can be set under Manual Setting Output Mode assign one
of the three outputs as AUX. Then, under AUX Setting, user can pick the prefer
type of video source from one of the connected camera.
3. AUDIO LEVEL
Setting the control audio levels on, press PRESET and then press AUDIO LEVEL
Button for Main audio output mix.
4. MENU
PC Control button is for PC remote control.
Press the up, down, left, right arrow button move to another control, and ENTER
button to confirm the setting.
5. WIPES
Wipe with border 6+2 options (changeable)
6. LOGO1 & LOGO2
Select SE-2000 Logo1, Logo2 Functions on the screen.
6