Restore To Factory Default - Datavideo HDR-1 Instruction Manual

Step 3: Press F1 to start the firmware upgrade process. Press the BACK button to abort
the operation and return to the previous page.
Step 4: Once the firmware upgrade process has completed, press OK to restart the
HDR-1.
Note: The HDR-1 automatically detects whether a different version of firmware is
available for upgrade or rollback.
A few things to note before the upgrade:
The firmware upgrade process takes approximately 10-14 minutes to complete.
•
• Firmware upgrade requires at least 256MB free space on the USB 3.0 flash drive.
• If any problems are encountered during the firmware upgrade, please clear all the
data stored on your USB storage device and repeat the above procedure.
• NEVER power off the device or unplug the power supply or remove the USB
storage device during the firmware upgrade process. If the firmware upgrade is
interrupted for any reason, the device may crash.
3.10

Restore to Factory Default

Press F1 to restore default factory settings. Press the BACK button to abort the
operation.
34