3.2
ActiveSync Connection
Using a null-modem cable connect UNO-1110 COM1 with one of COM port on
your computer
Install Microsoft ActiveSync software on your computer and make the serial port
you want connect with UNO-1110 available for ActiveSync (see ActiveSync help
for details).
ActiveSync Connection
The tool is used for the application program on-line programming/debug requirement.
User has to install the Microsoft ActiveSync program in configuration computer first.
For the detail operating procedure of ActiveSync, please follow the steps by steps
operating guide.
Step 1: Setting Up ActiveSync in a Configuration Computer
1.
Install Microsoft ActiveSync 4.5 for Windows XP/ Windows Mobile Device Cen-
ter 6.1 for Windows 7
2.
Please connect the ActiveSync cable (Null Modem cable, Advantech part no. :
1703093000) to COM1 of UNO-1110 and the COM port of configuration com-
puter for ActiveSync communication.
Step 2: Configure COM1 of UNO-1110
1.
Press Start of task bar of window system and select "Settings" / "Network and
Dial-up Connections".
2.
A window that shows all available connections will pop up. Click the properties
of ActiveSync icon that has the connection you want to configure.
Figure 3.4 Network and Dial-up Connections
Figure 3.5 Selected Connection
17
UNO-1110 User Manual