3.1
Networking
This section shows how to re-configure the IP of the UNO-1110 to meet your network
configuration. The procedure is listed below step by step.
1.
Press Start in the task bar of Windows and select "Setting" / "Networking and
Dial-up connections".
2.
A window that shows all available connections will pop up. Double click the icon
that has the connection you want to configure. For example, double click
DM9CE1 icon to configure.
3.
Select the "IP Address" tab.
The default IP address for EMAC1 is: 10.0.0.1 / DM9CE1 is: 10.0.0.2 and the
default Subnet mask is:255.255.255.0. So you can set your computer IP
address to 10.0.0.3 and set the Subnet mask to 255.255.255.0.
UNO-1110 User Manual
Figure 3.1 Network and Dial-up Connections
Figure 3.2 Selected Connection
Figure 3.3 Setting IP Address
16