Figure 3.34Select The Program; Figure 3.35Add Program Success - Advantech UNO-1110 User Manual

3. Click on the "Add" bottom to set the program for Auto-Run action. Click on the
"Program Path" bottom for selecting the program for Auto-Run setting.
Please choose the program then press "OK".
4. The program and its path we choose will show the below dialog window.
The Configuration Utility will add the selected program in Auto-Run requirement.
Please press "OK" to finish the configuration.
Figure 3.34 Select the Program
Figure 3.35 Add Program Success
33 UNO-1110 User Manual