Figure 3.46Password Properties In Windows Ce; Figure 3.47 Getway Resetting - Advantech UNO-1110 User Manual

You could set the password in WinCE's "Setting" / "Control Panel" / "Password". You
could see below picture for reference.
3. Connect to the UNO-1110 again, and the system will ask you to enter user name
and password. After authorization, you will enter Windows CE networking setup
page.
Note! The default user name is ADMIN.
UNO-1110 User Manual
Figure 3.46 Password Properties in Windows CE

Figure 3.47 Getway Resetting

56