Specified Lengths - Newland HR200 User Manual

Symbols
Interleaved 2 of 5
Specified Lengths
Program the engine to read specified lengths or ranges of specified lengths for
Interleaved 2 of 5. The length value must be 3 decimal digits. And the length
value MUST be an even number between 2 to 64.
Read "Enable Specified Length" to enable this feature or "Disable
Specified Length" to disable.
** Disable Specified Length
【Pro CMD：0405140】
Enable Specified Length
【Pro CMD：0405150】
The engine only read Interleaved 2 of 5 which are 12 and 24 bytes.
1. "Code Programming ON"
2. "Enable Specified Length"
3. "Add Code Length"
4. Digit Code "0"，"1"，"2"
5. "Save Programming"
6. "Add code length"
7. Digit Code "0"，"2"，"4"
8. "Save Programming"
9. "Code Programming OFF"
The engine only read Interleaved 2 of 5 between 12 bytes and 24 bytes.
1. "Code Programming ON"
2. "Enable Specified Length"
3. "Add Code Length"
4. Digit Code "0"，"1"，"2"
5. Digit Code "0"，"2"，"4"
6. "Save Programming"
7. "Code Programming OFF"
nlscan.com
Code Programming ON
Code Programming OFF
Add Code Length
【Pro CMD：0405160】
Remove Code Length
【Pro CMD：0405170】
Tools
Page 70