Serial Port; Baud Rate - Newland HR200 User Manual

Serial Port

The engine and the Host should use the same serial port parameters: baud rate,
parity check, data bits and stop bits. The sequence is as follows: 9600 (baud rate),
null (parity check), 8 (data bits), 1 (stop bits).

Baud Rate

Baud rate is the number of bits of data transmitted per second. Set your scan engine
baud rate to match the baud rate setting of the Host device. Otherwise, they can not
communicate.
The engine supports the following baud rates (The default baud rate is 9600):
【Pro CMD：0100030】
【Pro CMD：0100000】
【Pro CMD：0100010】
【Pro CMD：0100020】
【Pro CMD：0100040】
nlscan.com
**9600
1200
2400
4800
14400
Code Programming ON
Code Programming OFF
19200
【Pro CMD：0100050】
38400
【Pro CMD：0100060】
57600
【Pro CMD：0100070】
115200
【Pro CMD：0100080】
Tools
Page 30