Check Digit - Newland HR200 User Manual

Symbols
Codabar

Check Digit

Codabar may include Check Digit (not compulsory) following its barcode
message. It verifies the barcode message.
"NO Check, Transmit All" means to read without check and transmit
»
all bytes including barcode message and Check Digit.
"Check, Do Not Transmit Check Digit" means to read and check. If
»
verification is successful, transmits barcode message; if not, engine will not
send barcode message to the Host.
"Check, Transmit All" means to read and check. If verification is suc-
»
cessful, transmits all messages; if not, engine will not send barcode message
to the Host.
** NO Check, Transmit All
【Pro CMD：0409050】
Check, Do not transmit Check Digit
【Pro CMD：0409060】
When "Check, Do not Transmit Check digit" is enabled and barcode message length
minus one is less than Min Message Length, it will lead to an error.
E.g.：Reading a 4-byte (include check byte) Codabar with the Min Message Length being 4
bytes and "Check, Do not transmit Check Digit" enabled leads to an error.
nlscan.com
Code Programming ON
Code Programming OFF
Check, Transmit All
【Pro CMD：0409070】
Tools
Page 81