Message Interception - Newland HR200 User Manual

Message Interception & Pack Message Interception & Pack

Message Interception

Interception Rule No.1: It only intercepts selected symbols' raw barcode
messages and it effects all barcodes of the barcode format.
Interception Rule No.2: There are maximum 3 interception options restored in
the non-volatile memory. If more than 3 are programmed, the last 3 are stored.
For example, if there are 4 options are programmed in the order of Code 128
，Code 39，QR Code, and UPC-A and "Save". The 3 options are restored
in the order of: Code 39，QR Code, UPC-A.
Interception Rule No.3: If there are more than one options programmed for
a barcode format, the later one is used. For example, there are 3 options
restored, Code 128 option A, QR Code option, Code 128 option B. The Code
128 option B is used when a Code 128 barcode is read.
"Enable Interception" barcode should be read before intercepting message.
Steps should be followed to erase certain barcode(EAN-13 e.g.) interception options:
1、 Read " Erase Certain Barcode Interception Options" barcode;
2、 Get Symbol ID, for example, EAN-13:005
3、 Read digit codes accordingly.
4、 Read "Save" barcode.
**Disable Interception
【Pro CMD：0315000】
Enable Interception
【Pro CMD：0315010】
Program Intercept Option
【Pro CMD：0316000】
nlscan.com
Erase Certain Barcode Interception Options
【Pro CMD：0316010】
Erase Latest Interception Options
【Pro CMD：0316020】
Erase All Interception Options
【Pro CMD：0316030】
Tools
Code Programming ON
Code Programming OFF
Page 137