Set Discrete Lengths For Interleaved 2 Of 5 - Newland NLS-HR32 Series User Manual

【0006010】
【Enter Setup】

Set Discrete Lengths for Interleaved 2 of 5

The scanner can be configured to only decode Interleaved 2 of 5 barcodes within a specific length range or with a couple
of discrete lengths. The length must be an even number not greater than 64 and consist of three digits (a leading zero or
zeros may need to be added to meet the length requirement).
The discrete lengths become valid only when the Enable the Discrete Lengths option is enabled.
**【Disable the Discrete Lengths】
【Enable the Discrete Lengths】
Set the scanner to decode Interleaved 2 of 5 barcodes containing either 12 or 24 characters:
1.
2.
3.
4.
5.
6.
7.
8.
9.
71
【0405140】
【0405150】
Scan the Enter Setup barcode.
Scan the Enable the Discrete Lengths barcode.
Scan the Set the Discrete Length barcode.
Scan the numeric barcodes "0", "1" and "2". (See the "Digit Barcodes" section in Appendix)
Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
Scan the Set the Discrete Length barcode.
Scan the numeric barcodes "0", "2" and "4".
Scan the Save barcode.
Scan the Exit Setup barcode.
【0405160】
【Set the Discrete Length】
【0405170】
【Delete the Discrete Length】
【0006000】
**【Exit Setup】