Turning On/Off Mw Led On Another Extension - Toshiba IP5000 User Manual

Turning On/Off MW LED on Another Extension

If you call an extension and it's busy or there is no answer, you may be able to light
that extension's Message Waiting LED and enable that extension to call you back.
The ability to perform this feature is set in system programming.
1. Dial an internal extension. You hear busy tone or there's no answer.
2. Press
telephone, the Msg LED lights steady red and the LCD shows the station number
where you set a Message Waiting light. Example: "MW SET TO 3620."
If you decide to cancel the Message Waiting light at this point, press
again while ring-over tone is playing and the light will be cancelled.
3. Press
flashes until the called party presses the flashing
back.
4. To turn Off a Message LED that you have set on another extension, press
the extension number that has the message light set. Then press
release your telephone. Your LCD shows the extension and "MW CANCEL."
...or dial the extension that you set the Message LED on, then press
or hang up to release your telephone.
Strata CIX IP5000-series Telephone UG
7
or . The Msg LED flashes red on the called telephone. At your
. Your Msg LED turns Off. The Msg LED on the called telephone
10/08
The Basics
Message Waiting
button which calls you
#64
or hang up to
77
. Then press
7
or
plus
27