Message Waiting; Responding To A Lit Msg Led - Toshiba STRATA CIX User Manual

Ipt/dkt telephone
Hide thumbs Also See for STRATA CIX:
Table of Contents

Advertisement

The Basics

Message Waiting

Message Waiting
Use your
An extension can receive up to four simultaneous Message Waiting indications and
LCD messages. One message is reserved for the Message Center.
Your telephone can be programmed to have up to four additional (flexible) Message
Waiting buttons/LEDs. Check with your System Administrator to see if these buttons
have been programmed on your telephone. If so, substitute them when the
button/LED is mentioned in the following steps.

Responding to a Lit Msg LED

1. On an LCD telephone, if you see a "+," press
otherwise, go to Step 2. The "+" indicates additional messages. The LCD can show
up to three station messages for your extension and three for each additional
(phantom) extension that you may have.
2. Press
device that sent the indication. The LED continues to flash red.
3. After answering the message(s), place the handset back on-hook.
4. If the Msg LED continues to flash, you have more messages; repeat Steps 1~3
above to retrieve them. Voice mail devices turn off the LED/LCD indications after
a short delay, after you checked all messages.
5. To manually turn off your Msg LED, press your extension button, then press
#409
16
Msg
LED/button and LCD to see/retrieve message(s).
Msg
, then lift the handset. Your telephone rings the extension or voice mail
. Do this step for each message received.
SK3
to display additional messages;
Strata CIX and CTX IPT/DKT Telephone
Msg
12/05

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents