Virtual Tracks - Merging Pyramix User Manual

Virtual Tracks

A virtual track is a "mirror" of another existing track. It has the same output routing and contains the same clips as
an existing track, but it appears in the Project Editor as a separate track.
Note: Virtual tracks contain non-overlapping clips - that is, each clip on a virtual track is
not allowed to overlap with clips on a related virtual track. However, clips on the exact
same track can still be crossfaded. Virtual tracks can be used for the purpose of visualiz-
ing clips that may have a logical reason to appear on separate tracks of the editor, even
though they will be routed to the same mixer channel. An example of typical use is to
create virtual tracks to allow the display of several automation curves for a single audio
track.
Creating Virtual Tracks
To add Tracks to the Timeline, select Tracks > New Virtual Track
To create a virtual track or tracks, select the origin Track in the list, type the number of Virtual tracks required and
click on OK.
Note: Virtual tracks can be created automatically to display automation data. Please
see: Create a new Virtual Track to display the selection on page 268
Create New Virtual Track dialog
Tracks and Track Groups : Virtual Tracks 5 - 83