Media Option; Flatten Track Numbers; Unique Filename Extension; Quiet If Creation Failed - Merging Pyramix User Manual

Only available when Dubbing Mode is selected in the adjacent check box. A check in this box means that any
changes to track arming made whilst recording must be confirmed by a new Record command before they will
take effect.

Media option

One file per track
When checked, each recording on each track of a multi-track recording is recorded into a separate file. When this
option is off (which is the default), one single media file is created containing all the tracks.

Flatten track numbers

When a recording is made on a track, Pyramix always adds media number to it. When checked on (default), Pyra-
mix starts enumerating at one. E.g. If a recording is made on tracks 5 and 9 of a multitrack session simultaneously,
the media numbers will be 1 and 2. When this option is off, Pyramix adds the real track numbers to the media. In
the example above, this would be 5 and 9.

Unique filename extension

When checked, Pyramix will append a random number to the name of each new recording in order to avoid dupli-
cate file names.

Quiet if creation failed

Unless this box is checked, Pyramix displays a dialog with an error message when the creation of a media file fails.
This can be annoying if Pyramix is remotely controlled. Checking the box suppresses the error message.

Post Processing

These options determine what Pyramix will do after each recording is finished.

Prompt for name after recording

When checked, a Record Name dialog box will open immediately after recording is finished and playback of Pyra-
mix is stopped.
Record Name dialog box
If a name was entered in the Take Name field (see above) it will automatically appear in the Record Name dialog
box when it opens. You can edit the existing name, or replace it completely with a new name.

Keep in default library

When checked, new recordings will automatically appear in the Default library of the current Project.

Increment take number

When checked, each successive recording will have the name in the Take Name field applied to it, plus a number
that will increment with each new recording. E.g, if the first recording is named "Take", the next recording will
automatically be named "Take 2", etc.
Place on new tracks
When checked, Pyramix will place the newly recorded clips on new tracks. These new tracks will be added to the
Project Editor as soon as playback is stopped following a punch in/punch out recording. When first created, these
tracks are not assigned to mixer channels, so it will be necessary to assign them when you want to output them. If
this item is not checked, the new clips will be placed on the track(s) set to record them.

Clean up Media after recording

Note: This option is automatically set OFF when a Project is opened.
Settings : Project 27 - 511