External Effects Inserts - Merging Pyramix User Manual

Right-clicking on an installed plug-in pops-up a context menu, for example:
Insert before (effect clicked on)
Replace (effect clicked on)
Remove (effect clicked on)
Move ( VS3 Effect clicked on) to another stem
Copy Selected (Effect type) Effects to selected strips As it says. Target strips can be selected before or after selecting the
Copy Selected (Effect type) to All Strips As it says.
Remove All (Effect type) Effects
Remove All Effects
Copy All Effects to All Strips
Copy All Effects to Selected Strips Copies all the effects installed in the current Strip to all selected Strips.

External Effects Inserts

External Inserts are added in the same way as VS3 Effects. Click on Click to Add and choose Other > External
Insert
> drops down a list of effects of the same type that can be inserted before current the
effect.
> drops down a list of effects of the same type that can replace the current effect. Dou-
ble-Clicking an installed effect does the same thing.
Uninstalls the current effect from the Strip or Bus
Pops up a dialog with all available stems for this bus. (Only present when the Effect is in a
Multi-Stem Bus) The Iteration and Stem numbers are then shown on the Effect:
Thus 1-3 means Iteration 1 on Stem 3
effect(s)
Removes all effect of the current type clicked on from the Strip.
Removes all effects of all types from the current Strip.
Copies all the effects installed in the current Strip to all other Strips.
Mixer : Configure Page
Effect context popup
10 - 152