Projects With Existing Automation; Display And Editing Of Automation Data - Merging Pyramix User Manual

Ctrl + Shift + Alt :
When Releasing a Control:
Ctrl :
Shift :
Ctrl + Shift :
Ctrl + Shift + Alt
Ctrl + Alt + Esc
Hardware Remote Controllers
Devices offering external remote control such as the Merging Ramses MSC or OASIS and others will provide dif-
ferent modifiers to alter the Global Auto-Write and Release Modes depending on the specific hardware availability
(dedicated buttons, existing button combinations, special movements, etc...)

Projects With Existing Automation

When opening a Project that has existing dynamic automation and where a mixer element is no longer present or
when rebuilding a mixer where a previously automated element has been removed the following dialog appears:
Clicking on Yes removes the redundant data. Clicking on No retains it giving the opportunity to re-instate the
missing element(s).

Display and Editing of Automation Data

The automation data recorded for any control can be viewed and edited on any track in the Timeline.
Clicking the
line when being replayed and a red line when being written.
Note: If you wish to display automation on one track of a stereo pair (or multichannel
GPS) you can Ctrl + Click the Show/Hide button to toggle individual channels.
Right-clicking the Show/Hide Automation button pops up the automation menu for the track.
Note: This menu is modal. I.e. the options available depend on whether there is any pre-
existing automation data.
Forces the Update & Hold Mode
Forces the Snap Mode
Forces the Auto-Release Mode
Forces the Write to Next Mode
Forces the Hold & Write to Next Mode
Releases Auto-Write
Show/Hide Automation button in the Track Header displays or hides automation data as a black
Automation : Projects With Existing Automation 14 - 267