Tracks; Adding Tracks; Creating Tracks Via Paste - Merging Pyramix User Manual

Tracks

Each Project has a user defined number of audio Tracks on which audio Clips can be placed, or audio inputs can
be recorded. Blocks representing placed or recorded Clips will appear on the Track as soon as a Clip has been
placed or recorded onto it. The Track itself extends horizontally beneath the Time Scale bar, and multiple Tracks
are stacked vertically.
On the left side of each Track is a Header panel with various controls and information displays. Please see: Track
Header Panel on page 74
Some operations only apply to a selected track. A Track can be selected by left-clicking anywhere on the Header
which will then appear in a darker shade of gray. However, when selecting a Track, be careful NOT to inadvert-
ently click on any of the Track buttons, thereby changing a Track function: the Track Name is a good place to click
in order to select it.

Adding Tracks

By default, a new Project opens with the same number of Tracks as there are Input Channels defined in the
Mixer for the Project. However, Tracks can easily be added or deleted.

Creating tracks via paste

If a clip is dragged and dropped or copied and pasted from Media Management or a Library onto a blank area of
the TimeLine where no tracks exist, sufficient tracks will be created below the last existing track to accommodate
the number of channels in the clip.
Tracks and Track Groups : Tracks 5 - 70