Advertisement
PMA 35D-X, PMA 35D-X000C, PMA 35D-X00CV1
1 Load plate
2 e key (ON/OFF)
3 y Correction key: decrease
(only on the PMA 35D-X00C and
PMA35D-X00CV)
4 = Tare key
5 Display
6 w key (TOGGLE) On the 35D-X/35D-
X00C, you can toggle to two decimal places
– from 0.5 g to 1.0 g – within the entire
weighing range of – 0.5 g to 35 kg –
or – 1 g to 35 kg – On the PMA 35D-
X00CV1, you can toggle from g to Parts per
pound within the entire weighing range
7 v key (FORMULATION)
8 [REC] key (for displaying the final quantity in
the recalculation mode (only on PMA 35D-
X00C and PMA 35D-X00CV1)
9 [MEM] key (MEMORY) (only on PMA 35D-
X00C and PMA 35D-X00CV1)
10 Y Correction key: increase (only on PMA
35D-X00C and PMA 35D-X00CV1)
11 Display and control unit
12 Column
13 Data interface port (25-pin)
14 Terminal for connecting an equipotential
bonding conductor (grounding terminal)
15 DC jack
16 Leveling foot
2
Important Note to Users
G Make sure to carefully read and follow
sections marked with this symbol.
They contain important safety instructions
and information.
G Use only the adapter that is included in
delivery (part no. 6965619) to connect a 9-pin
connecting cable to the 25-pin data interface
Note:
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this
equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own
expense. Changes or modifications not expressly
approved by Sartorius AG could void the user's
authority to operate the equipment.
Advertisement
