Table of Contents
Advertisement
12
Putting into operation
1.
Steering the machine: To change
direction tilt machine by pressing a foot
against the footrest and pull the handle
at the same time. Then turn machine
into desired direction.
2.
Always secure machine by activating
the parking brake before starting work!
3
. Check water inlet filter for
cleanliness prior to putting the
machine into operation! Unscrew
glass body of the inlet filter and check if
metal sieve is soiled.
4.
Always check oil level prior to
operation!
Open the right half of the protecting
hood.
Do not start the machine if the oil level
is not between the two markings on the
oil-level glass. Refill with oil if necessary.
See page 23
5.
Connect machine to water mains
(2 - 8 bar pre-pressure).
Inside diameter of hose minimum
1/2 ". The water storage tank is filled
with water. The float valve shuts the
water intake as soon as the tank is
full.
Advertisement
Table of Contents
