Putting Into Operation - Kranzle WS 700 TS Operating Manual

Putting into operation

Neither set up or operate the WS-series in rooms where there is a
risk of fire or explosion nor put it into puddles. Do not use the high
pressure cleaner under water. If, none the less, the high pressure
cleaner is operated in a hazardous area, the applicable safety
regulations are to be observed.
20
1. Unwind high pressure hose straight
and without nooses. (When using high
pressure hose extensions take care
that the max. length of 20 m is not
exceeded!)
2. Plug screw high-pressure hose included
in scope of delivery at pump outlet and
tightly screw pressure-tight.
3. Tightly screw together high pressure
hose and safety trigger gun.
Putting into operation
Prior to insertion, check plug coupling connection of lance for
cleanliness (sand, dirt ..) and use clear water to clean, if necessary.
Impurities may damage the sealing in the plug coupling.
Accessories may only be connected to a Kränzle-approved trigger gun
with safety catch.
4. First pull back the retaining sleeve
of the safety trigger gun, then
insert lance into the plug coupling
sconnection of the safety trigger gun.
5. After insertion of the lance, release
retaining sleeve and make sure that
the lance is in a secure position.
Grease quick release nipple regularly
using acid-free grease.
21