Table of Contents
Advertisement
Putting into operation
It is imperative that safety instructions be observed during
use of the high pressure cleaner.
Neither set up or operate the X-series in rooms where there is a risk of
fire or explosion nor put it into puddles. Do not use the high pressure
cleaner under water. If, none the less, the high pressure cleaner is
operated in a hazardous area, the applicable safety regulations are
to be observed.
18
1.
For high pressure cleaners with hose
drum the enclosed hand crank mus be
applied prior to first operation. For this
purpose, please set up the high pressure
cleaner. Plug the hand crank onto the
hexagon and attach it with the enclosed
screw and washer.
2.
Move high pressure cleaner to the job
site. The X-series is a movable high
pressure cleaner with sturdy trolleys
ideally suited for difficult terrain and
stairs.
Putting into operation
When using high pressure hose extensions take care that the max.
length of 20 m is not exceeded!
Accessories may only be connected to a Kränzle-approved trigger gun
with safety catch.
3.
High pressure cleaners with hose drum
must be uncoiled completely. Unwind
high pressure hose straight and without
nooses.
The high pressure hose may leave signs
of abrasion on some floors. Alternatively,
please also find non-marking high
pressure hoses in our range.
4.
Tightly screw together high pressure
hose and safety trigger gun.
5.
First pull back the retaining sleeve of
the trigger gun with safety catch, then
insert nozzle into the plug coupling
connection of the trigger gun with
safety catch.
6.
After inserting the plug-in nipple of
the nozzle, release retaining sleeve and
make sure that the nozzle is in a secure
position.
Grease quick release nipple regularly
using acid-free grease.
19
Advertisement
Table of Contents
