Usage as a cold water high-pressure cleaner
During high-pressure operation (above 30 bars) the temperature may not exceed
90 °C!
During steam operation (90 - 150 °C) the pressure may not exceed 30 bar)
To reach the steam level (above 90 °C water temperature) adjust the
pressure below 30 bar and choose by means of the thermostat the desired
temperature of up to max. 150 °C.
In the case of machines with hose drums, the high pressure hose
must always be unwound completely.
1.
2.
R
3.
R
4.
Start cleaning task
R
Switch on main switch located below
the right part of the machine hood.
(switch to "ON")
a) Temperature mode: Set required
temperature at the thermostat.
(Min. temperature 40 °C)
b) Percentage mode: Set percentage
value for heating output. (see pages
18/19)
Detergent valve must be closed!
(switch in left end position)
Switch on main switch with disengaged
spray gun. Vent high-pressure cleaner:
Pull and release trigger of spray gun
various times
Start ignition. The water is heated up
and constantly kept at the set
temperature.
15