Configuring Store & Forward Fax (T.37); Store & Forward (T.37) Parameters - Multitech FaxFinder FF240-IP Administrator's Manual

ADVANCED CONFIGURATION
Configuring Store & Forward Fax (T.37)
Store & Forward Fax allows users to send emails as faxes using the T.37 format. This section describes T.37
parameters. For more information on using T.37, refer to T.37 Advanced Usage
Note: Click Defaults to restore the factory default settings.
1. Click Fax Configuration > Store & Forward Fax (T.37).
2. Check Enable T.37.
3. Set parameters and click Save.
Store & Forward (T.37) Parameters
Field
Enable T.37
Require Authentication
Set User from Envelope
Sender
Fax Priority
Max Attempts
Retry Interval
Email Fax Receipt
Fax Attachment with
Receipt
Include Cover Page
Default Cover Page
Use Email Body as
Comments
54
Description
Check to enable T.37 faxing.
Check to require a valid username and password to use with Store & Forward faxing.
Check to link faxes sent via T.37 emails with user accounts found in the FaxFinder
Users menu. When FaxFinder matches a sender's email address with a FaxFinder user,
it logs the fax as sent by that user. Also, if you enable Include Cover Page, FaxFinder
populates the cover page's sender information with the user's information.
Set the default priority for store and forward faxing. This setting is used when there
are more faxes in the queue than there are available channels. Options are:
■ Low
■
Medium/Low
■
Medium
■
Medium/High
■
High
■ 1st Priority
Enter the maximum number of times you want FaxFinder to fail sending an email fax
before treating that fax as failed.
Enter how long, in seconds, you want FaxFinder to wait between unsuccessful
transmission attempts.
Set the condition that will trigger an email to the sender. Options are:
Failure Receipt sent only if the fax fails.
Always Receipt sent on completion, success or failure.
Never Receipts are never sent.
Attaches a copy of the sent fax with the email fax receipt. Use this drop down list to
select the attachment format. Options are. PDF, TIFF, or None. Default is PDF.
Check this to include a cover page with Store & Forward faxes.
Select the cover page to use by default with Store & Forward faxes.
Check this if you want the body of the email inserted as fax comments.
®
FaxFinder Fax Server FF240-IP Administrator Guide