Page 1
® FaxFinder V.34 Fax Server Configuration Guide for Inter-Operation with Altigen AltiServ Phone Systems...
Page 2
PN S000418B, Version B Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Page 3
4. Write down the station port extension number (this document uses 200 as an example). 5. If using a FF200, FF420 or FF820, you may need to set up a hunt group so that AltiServ can route a fax call properly.
Page 4
FaxFinder Configuration Guide: Altigen AltiServe Phone Systems 2. Configure SMTP so that FaxFinder can send fax mail to mail server: 3. Configure Time Zone and Date/Time Format: 4. Configure the modem to receive a fax call Three important fields need your attention: •...
Page 5
FaxFinder Configuration Guide: Altigen AltiServe Phone Systems 5. Add users in Phone Book. FaxFinder will use Ext # to associate the Email Address to the user. Note that the Ext # is actually a fax DID/DNIS number from the AltiServ’s point of view. It is the DTMF stream AltiServ will generate and transmit to FaxFinder through the station port.
Page 6
FaxFinder client software. Please direct your questions regarding technical matters, product configuration, verification that the product is defective, etc., to our Technical Support Department at (800) 972-2439 or email Product support resources are available at the Multi-Tech web site: support@multitech.com www.multitech.com...
Need help?
Do you have a question about the FaxFinder FF420 and is the answer not in the manual?
Questions and answers