Show X.25 Forward Table; Show X.25 Lapb-Information - Zte ZXR10 Command Manual

ZXR10 Command Manual (Remote Access Volume)
Command Mode
Syntax
Example
Function
Command Mode
Syntax
Example
Function
Command Mode
Syntax
Syntax
Description
28 Confidential and Proprietary Information of ZTE CORPORATION
All modes except user EXEC
show x.25 default-trunk-config
This example describes how to display information about the con-
figuration of X.25 default relay.
ZXR10(config)# show x.25 default-trunk-config
x.25 default trunk :
The descriptions of above information is displayed as follows.
Field
x.25 default trunk
serial_5/3

show x.25 forward table

Use this command to display information about the X.25 transpar-
ent transmission configuration.
All modes except user EXEC

show x.25 forward table

This example describes how to display information about the X.25
transparent transmission configuration.
ZXR10(config)# show x.25 forward-table
Ingress Egress
V24-1 v24-2
V24-3 fr-1
Descriptions of the above information are displayed as follows.
Field
Ingress
Egress
DLCI
Forward-type

show x.25 lapb-information

Use this command to show the X.25 LAPB layer data.
All modes except user EXEC
show x.25 lapb-information interface <interface-name>
<interface-name>
serial_5/3
Description
X.25 default trunk configuration
Configured trunk interface
DLCI forward-type
none DTE-Switch
100 XT_FR_DLCI
Description
Ingress name
Egress name
FR interface DLCI
Transparent transmission type XT_FR_DLCI:
through FR interface DTE-Switch: from an
X.25 interface to another
Interface name