Syntax
Description
The default packet layer window size is 7.
Default
The configuration of the packet layer window size must refer to
Instructions
the module value. Module 8 ranges from 2 to 7, and module 128
ranges from 2 to 127.
This example describes how to set the X.25 packet layer window
Example
size of synchronous serial interface serial_1/1.
ZXR10(config)#interface serial_1/1
ZXR10(config-if)# x.25 packet window size 10
x.25 port-manner
Use this command to configure the X.25 port management mode.
Function
Restore default with the no form of this command.
Interface configuration
Command Mode
x.25 port-manner {user | trunk}
Syntax
Syntax
Description
There is no such configuration by default.
Default
This example describes how to set the X.25 port management
Example
mode on the synchronous serial interface serial_1/1.
ZXR10(config)#interface serial_1/1
ZXR10(config-if)# x.25 port-manner user
x.25 pvc
Use this command to configure the X.25 PVC. Delete the setting
Function
with the no form of this command.
Global configuration
Command Mode
x.25 PVC<pvc-num> interface <interface-name> lcn <lcn-n
Syntax
um> interface <interface-name> lcn <lcn-num>
no x.25 pvc <pvc-num>
Syntax
Description
<size>
user | trunkuser |
trunk
<pvc-num>
<interface-name>
<lcn-num>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 X.25 Protocol Configuration
Packet layer window size, in the range of
2~127
X.25 port management mode
X.25 PVC number in the range of 1~255
X.25 start interface number (interface name)
X.25 start LCN, in the range of 1~1024
43