xStack
config wac method
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the authentication method:
D G S -3 4 26 :5 # c on f ig w a c m e th od r ad i us
C o m ma n d: c o n fi g w ac m et h od r a d iu s
S u c ce s s.
D G S -3 4 26 :5 #
config wac auth_failover
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure WAC authentication failover:
D G S -3 4 26 :5 # c on f ig w a c a u th _f a i lo v er e n a bl e
C o m ma n d: c o n fi g w ac a ut h _f ai l o ve r e na b l e
S u c ce s s.
D G S -3 4 26 :5 #
config wac default_redirpath
Purpose
Syntax
Description
Parameters
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to configure the global parameter of the web authentication.
config wac method [local | radius]
This command is used to configure the global parameter for Web authentication.
method – Specifies the authenticated method.
local – The authentication will be done via the local database.
radius – The authentication will be done via the RADIUS server.
Only Administrator and Operator-level users can issue this command.
Used to configure WAC authorization failover.
config wac auth_failover [enable | disable]
This command is used to configure WAC authorization failover. When the authentication
failover is disabled, if RADIUS servers are unreachable, the authentication will fail. When
the authentication failover is enabled, if RADIUS servers authentication are unreachable,
the local database will be used to do the authentication. The default state is disabled.
enable – Enables the protocol authentication failover.
disable – Disables the protocol authentication failover.
Only Administrator and Operator-level users can issue this command.
Used to configure WAC default redirect path.
config wac default_redirpath <string 128>
This command is used to configure WAC default redirect path. If the default redirect path
is configured, the user will be redirected to the default redirect path after successful
authentication.
When the string is cleared, the client will not be redirected to another URL after
successful authentication.
<string 128> – The URL that the client will be redirected to after successful
authentication. The redirected path is cleared by default.
438