Tenovis Integral T3 Compact Operating Instructions Manual page 80

If in doubt, look it up
If something is not working
The call number of a caller is not displayed
Call is transmitted without caller's number, e.g. an analog call or the caller has
switched off display of his own number.
Short tones during call
You have switched on the loudspeaker. You and your caller hear a short attention
tone.
or
cut-in tone
You are participating in a cut-in connection.
A function is not executed
The function may first need to be enabled by Tenovis Service.
Telephone cancels early while programming
You may not have pressed a key for about 60 seconds. This always terminates any
programming procedure.
You cannot set up a call diversion
Ask your Tenovis Service whether this feature is activated for your telephone.
A call number dialled by code dialling cannot be extended
It is possible that the feature "Post dialling" for the code dialling destination is not
released in the telephone system. Ask the Tenovis Service department.
80